Микшерный пульт ​Behringer Xenyx QX1622USB

The Behringer Xenyx QX 1622 USB is a 16-input mixing console with a built-in USB computer audio interface that allows you to mix and shape multiple audio signals to multiple outputs.

Excellent Mic Preamps

The preamps offer a stunning 130 dB dynamic range with bandwidths from 10 Hz to over 200 kHz. Armed with these outstanding mic preamps, it delivers transparent, crystal-clear performance. These state-of-the-art components represent an important step in the development of audio technology, and they can easily work on their own.

Clark Teknik FX

The built-in Klark Teknik FX 24-bit dual-motor effects processor has 32 presets including reverb, chorus, flanger, delay, pitch shift, multi-effects that you can edit in real time. Four built-in compressors are designed to make it easy to control the dynamics of your mix, and with just one knob, you can dial in just the right amount of compression for any sound.

british equalizer

The channel EQ is based on the same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. The XPQ stereo surround effect allows you to create a wider stereo image.

Characteristics:

Total inputs: 16 inputs

Mic/Line Inputs: 4 x XLR mic inputs, 4 x 1/4" TRS line inputs

Stereo line inputs: 4 x 1/4" TRS left and right pair inputs

AUX Sends: 2

AUX Returns: 2 stereo returns

2 Trk Master I/O: 2 x balanced XLR outputs

2 x 1/4" TRS outputs

ALT I/O: 2 x 1/4" TRS auxiliary outputs

stereo RCA: 2-track outputs

Monitor outputs: 2 x 1/4" TRS control room outputs

1 x 1/4" stereo headphone output

EQ section: 3-band EQ with medium sweep on each channel

Channel level control 60 mm faders

Measurement of 12-segment stereo LED counters

Clip LEDs on each channel

Microphone Inputs: XLR, electronically balanced, discrete input circuit

Microphone Input Noise (EIN): 20 to 20,000 Hz

0 ohm source impedance: -134dB / -136dB A-weighted

50 ohm source impedance: -131 dB / -133 dB A-weighted

150 ohm source impedance: -129 dB / -131 dB A-weighted

Frequency Response Preamp: <10 to 150,000Hz (-1dB), <10 to 200,000Hz (-3dB)

Mic input to main output: <10 to 160000Hz: ±3dB

Gain range: 10 to 60 dB

Maximum input level: +12 dBu with +10 dB gain

Resistance: 2 kΩ balanced

Signal-to-noise ratio: 107 dB / 110 dB A-weighted (0 dBu In at +22 dB gain)

Total Harmonic Distortion (THD): 0.005% / 0.004% A-weighted

Switchable phantom power: +48V

Line Input: 1/4" TRS jack, balanced

Resistance: about 20 kΩ, 10 kΩ unbalanced

Gain range: -10 to +40 dB

Maximum input level: 30 dBu

Stereo input: 4 x 1/4" TRS jack, balanced

Resistance: about 20 kΩ, 10 kΩ

Gain Range: -20 to 20 dB

Maximum input level: 22 dBu

EQ type mono channels Low: 80 Hz, ± 15 dB

Medium: 100 to 8000 Hz, ± 15 dB

High: 12,000 Hz, ± 15 dB

EQ type stereo low channels: 80 Hz, ± 15 dB

Low Mid: 500Hz, ±15dB

High Mid: 3000Hz, ±15dB

High: 12,000 Hz, ± 15 dB

AUX section

AUX Sends Type: 1/4" TRS jack, balanced

Resistance: about 120 ohm

Maximum output level: 22 dBu

AUX return type: 1/4" TRS plug, electronically balanced

Resistance: Approximately 20 kΩ balanced, 10 kΩ unbalanced

Maximum input level: 22 dBu

Main outputs: XLR, balanced

Resistance: approximately 240 ohms balanced, 120 ohms balanced

Maximum output level: 28 dBu

Controller output type: 1/4" TS balanced

Resistance: about 120 ohm

Maximum output level: 22 dBu

Headphone type: 1/4" TRS jack, unbalanced

Resistance: 25 ohm

Maximum output level: +21 dBu / 150 ohms (+25 dBm)

DSP Type: Clark Technic

Converter: 24-bit sigma-delta, 64x/128x oversampling

Sampling frequency: 40 kHz

Wireless USB adapter: accepts signal from 2 independent Behringer ULM microphones

USB Audio: stereo input/output

Connector: Type B

Converter: 16-bit

Sampling frequency: 48 kHz

Main mix at 0 dB with channel fader at 0 dB: -82 dB / -85 dB A-weighted

Mains: 100 to 240 V, 50/60 Hz

Power Consumption: 50W

Fuse 100 to 240 V: T 1.6 AH 250 V

Plug connection standard: IEC

Dimensions: 325 x 348 x 90.0mm

Weight: 3.5 kg