Monitor Audio CP-WT380IDC

The speaker system Monitor Audio CP-WT380IDC is designed to be built into the walls of the sounded room and have a closed case. This allows you to get a guaranteed high quality sound when installing speakers in any walls, including hollow ones, as well as protect the speakers from dust or accidental mechanical damage.

The speakers have a three-way configuration and are equipped with a combined mid/high emitter IDC (Dual Concentric), which can be rotated at a slight angle to obtain the desired sound directionality. The IDC module consists of a 100mm C-CAM inverted midrange driver (made of an aluminum alloy and coated with a ceramic layer) and a 25mm C-CAM gold-plated dome tweeter. The coaxial transducer provides a uniform sound in the operating frequency range, representing an ideal "point source of sound" from the point of view of acoustic theory.

The bass driver in the Monitor Audio CP-WT380IDC also has a patented cone design, which is made using RST technology and is also an aluminum diaphragm coated with ceramic. RST provides for an additional increase in the rigidity of the diffuser and damping of parasitic resonances by covering it with hemispherical recesses. This solution has long been successfully used in high-end Monitor Audio cabinet speakers, as it can significantly improve the quality of bass sound. In addition, due to the uniformity of the speakers used, the speakers Monitor Audio CP-WT380IDC can be used in conjunction with cabinet speakers of the company, for example, in surround sound systems.

There are three switches on the front of the speaker to adjust the speaker's sound parameters. Using them, you can change the frequency response of the speaker in the medium and high frequencies, as well as compensate for possible distortions in the tonal balance if it is placed, for example, near perpendicular walls or large interior items. The front panel of the speaker is made of aluminum, and the protective steel mesh is fastened with magnets.

Features of built-in acoustics Monitor Audio CP-WT380IDC

• Rotatable coaxial mid/high driver
• Frequency response switches in the treble and midrange
• Woofer RST C-CAM 200 mm

Characteristics of built-in speakers Monitor Audio CP-WT380IDC

• Features and purpose of acoustics - built into the walls
• Number of speakers - 3
• Number of lanes - 3
• Tweeter type - diameter 25 mm, gold-plated dome C-CAM (integrated into the IDC unit)
• Diameter and type of midrange emitter - 100 mm, cone C-CAM (integrated into the IDC block)
• Diameter and type of woofer - 200 mm, diffuser RST C-CAM
• Frequency range - 50 Hz - 30000 Hz (- 6 dB)
• Impedance - 6 Ohm
• Sensitivity - 89 dB
• Maximum sound pressure - 109.6 dB
• Crossover tuning frequency - 300 Hz (6 dB / octave), 3 kHz, (12 dB / octave)
• Adjustments - MF: + 3 dB / 0 / - 3 dB, HF: +3 dB / 0 / - 3 dB
• Compensation for the proximity of reflective surfaces - yes
• Recommended input power - 30 - 120 W
• Input connectors - 2 terminals
• Case material - mineral-filled ABS, aluminum front panel
• External dimensions (WxHxD) - 472 x 303 x 106 mm
• Mounting hole and depth - 438 x 269 x 99 mm
• Weight - 5.62 kg
• Protective grill - steel, magnetic fixation
• Mounting kit - WB10