Built-in acoustics Focal 300 IW6 White

Focal 300 IW 6 is designed to be built into walls. It is designed to accurately reproduce musical passages for stereo listening or watching movies with multi-channel sound. It features natural and crisp mids, perfect for vocals or movie dialogue. This versatile speaker perfectly captures the full sound of Focal products. This speaker This two-way speaker consists of a 16.5cm Flax diaphragm woofer/midrange driver and an aluminum-magnesium alloy concave dome tweeter. in the Utopia, Sopra and Electra lines. The strength and lightness of these membranes allow you to get a sound of remarkable neutrality and high resolution. The tweeter is perfectly matched to the loudspeaker acoustics thanks to two adjustment possibilities.

The Focal 300 IW 6 built-in speaker is extremely easy to install. The included EQI (easy Quick Installation) mounting frame is suitable for all wall thicknesses from 5 to 30 mm. No screws or tools needed. The frame is equipped with locking tabs that support the system in the desired position. After installing the frame, it is enough to insert the column and fix it by turning it a quarter of a turn. To complete the installation, it remains only to choose a square or round protective grid. Thanks to the magnets, it is enough to install it on the column. The mesh is equipped with anti-vibration pads that limit the risk of interference when listening. The white protective mesh is easy to paint to blend in perfectly with your walls or ceiling. The column is protected from dust and insensitive to humidity. It can be used in the bathroom, kitchen, etc.

Although the Focal 300 IW 6 built-in speakers were created in 5.1 home theater or multi-channel setups, they are great for recreating all forms of music as realistically as possible. Ceiling or wall mounted speakers are often used to provide surround sound effects. Easily integrated into walls, these discreet speakers let you play the full soundtrack of movies without cluttering the back of your living room. IW speakers from the 300 Series can also be mounted around the screen as stereo speakers and center speakers. Home theater devices disappear completely into walls and ceilings, allowing you to fully enjoy the screen and sound images.

The membrane consists of a flax fiber core covered with two layers of fiberglass. Eco-friendly fabric gives the membrane lightness, strength and load-bearing capacity. It also provides significant timbre neutrality. Magnificent definition of averages and a good saturation of low frequencies. The 16.5 cm driver provides good power retention and exceptional acoustic response. Generates 92 dB sound.

The TNV2 tweeters of the Focal 300 IW 6 speakers have already been used in the Chorus and Easya lines. This model uses Focal's exclusive concave dome technology for optimal power transfer and limited directivity. The aluminium-magnesium alloy dome guarantees unique characteristics in terms of strength, damping high frequencies for soft and punchy sound. The silky sound is further enhanced by the microporous PVC surround supporting the dome. The Focal 300 IW 6 tweeter has 3 adjustable positions (-3dB, 0dB, +3dB) to adjust the level of high frequencies in the listening area. The tweeter can also be tilted (±20°) and rotated 360°. You can aim the tweeter at your listening area to increase the fidelity of high frequencies and the stereo sound image. These two settings provide control over the off-axis frequency response of the speaker.

Protective grids for all acoustic systems now fully correspond to the area of their front panel and do not require a reserve when preparing the installation site. They are mounted simply on magnets, which greatly simplifies the life of installers. Also, the procedure for fixing acoustic systems in a niche after installation has been significantly simplified - in some models, it is enough to turn the levers displayed on the front panel by half a turn, and the installation is completed.

Features Focal 300 IW 6:

• Drivers 16.5 cm, 25 mm Al/Mg dome tweeter
• Sensitivity (2.83 V / 1 m) 90 dB
• Frequency response (+/- 3 dB) 55 Hz - 28 kHz
• Low frequency point (-6 dB) 45 Hz
• Nominal impedance 8 ohm
• Minimum impedance 4.5 ohms
• Recommended amplifier power 25 - 130 W
• External dimensions (H x W x D) 323 x 220 x 98 mm
• Cut-out diameter (H x W) 292 x 191 mm
• Cutout depth 93 mm
• Net weight (with front grille) 2.25kg
• Total weight (with packaging) 3.85 kg