Topping D30 Silver DAC

Topping D30 is extremely easy to use and does not require much immersion in the wilds of formats, compatibility and drivers. Extremely easy to set up and operate . To get started, you only need to connect power and two cables: a cable from the source and a cable to your amplifier or active speakers.

This completes the installation and configuration process. To connect to a Windows-based PC, you will need to install the drivers from the disk that comes with the kit.

Topping D30 DAC features:

• Three inputs: USB, optical and coaxial , supporting 16-24bit/44.1-192kHz
  
• DSD64/DSD128 playback
• Line output implemented by RCA outputs
• Extremely simple interface : two selectors (on and input selection) and two indicators
  
• Stylish , small (12 * 4 * 18 cm) and reliable aluminum case
  
• Asynchronous data transfer via XMOS USB interface
  
• DAC built around CS4398 digital-to-analog conversion chip
  
• Preamp on OPA2134
  
• Japanese and German components

Features Topping D30:

• Line Out Output Level: 2.1Vrms @ 1KHz
  
• Operating frequency range: 10 Hz - 20 kHz
  
• Inputs :
  
  • USB: 16-24bit / 44.1-192KHz, DSD64, DSD128
    
  • coaxial: 16-24bit / 32-192KHz
    
  • optical: 16-24bit / 32-192KHz
    
• THD+N:
  
  • USB: 0.00062%
    
  • optical: 0.00063%
    
  • coaxial: 0.00065%
    
• SNR:
  
  • USB - 115.7 dB
    
  • optical - 113.2 dB
    
  • coaxial - 113.4 dB
    
• Channel separation:
  
  • USB - 117.7 dB
    
  • optical - 117.6 dB
    
  • coaxial - 117.6 dB