Floor standing speakers Fyne Audio F303i Black Ash

25mm polyester soft dome tweeter; excellent internal damping and resonance control, cast rare earth magnet (neodymium); a powerful and compact magnetic system, the phase-leveling insert is integral with the protective mesh, regulates the phase of radiation from different points of the membrane dome, equalizes the frequency response and direction of sound radiation.

Low-frequency speaker, paper diffuser of a complex composition of fibers of different fibrils and lengths; natural sound, natural vocal transmission and clear processing of transient processes, suspension with variable pitch corrugation FyneFlute TM; effective damping of the vibrational energy of the diffuser and parasitic resonances, phase-equalizing nozzle for uniform and homogeneous directivity characteristics at medium frequencies.

Blocking filters are built with high quality, precision rated components, including low loss laminated core inductors in the low pass filter and polypropylene capacitors in the high pass filter, computer simulation optimized circuitry finalized through expert audition, high quality gold plated inputs terminals (in the F303 model there are two pairs of them for a two-cable bi-wiring connection).

The body is a rigid MDF structure with a tie system; damped loudspeaker mounting, the F303 model uses the D'Appolito configuration (MF-HF-MF vertically), which gives a uniform directivity characteristic in the vertical plane, floor-standing models are equipped with a base plate mounted on spikes; this gives stability, calculated grip on the floor, clear bass and good stereo localization; the bass reflex output on the rear panel eliminates the influence of airborne noise on the sound.

Specifications :

• System type 2-way, rear ported
• Recommended amplifier power (W RMS) 30 - 120
• Continuous Power Control (W RMS) 75
• Sensitivity (2.83 V at 1 m) 91 dB
• Nominal impedance 8 ohms
• Frequency response (-6 dB typical room) 32 Hz - 34 kHz
• The drive is complemented by 2 x 150mm multi-fiber bass/mid 1 x 25mm titanium dome tweeter
• Crossover frequency 3.2 kHz
• Crossover type 2nd order low frequencies, 3rd order high frequencies
• Dimensions - HxWxD 962x233x308 mm (37.9x9.2x12.1")
• Weight - each 14.6 kg (32.2 lb)
• Finish option - Vinyl