Сабвуфер SVS SB-1000 Pro White Gloss

The SVS SB-1000 Pro subwoofer is based on the powerful Sledge STA-325D amplifier, the output stages of which are made on MOSFETs capable of providing high output current. The amplifier delivers 325 watts of continuous power peaking up to 820 watts with low distortion. Signal processing uses a 50MHz DSP from Analog Devices with 56-bit filtering. Its processing power guarantees impeccable sound quality adapted to the acoustic characteristics of the room.

The drivers in the SVS 1000 Pro subwoofers were developed almost from scratch for the series. The design of the drivers uses a double ferrite magnet and a parabolic suspension of a long-throw aluminum cone, ensuring the achievement of high sound pressure in the listening room. with a long range for extreme walks with increased indoor pressure.

When the enclosed subwoofer is equipped with a powerful amplifier and a quality driver, you can expect deep and clear bass. But only if such a system is properly managed. To meet this challenge, the SVS SB-1000 Pro is equipped with a powerful DSP that can be controlled via iOS or Android apps. It has all the settings you need to get the best bass sound from your subwoofer.

Subwoofer SVS SB-1000 can be called universal simply based on its specification. A 12-inch driver and 300 watts of power allow it to be used in rooms of different sizes, and if we are talking about a larger cinema, you can simply increase the number of subwoofers - bass depth is enough for a movie. Another obvious and important fact is the size of the model. A cube with a face length of 34 cm is a very compact size for a powerful subwoofer operating from 24 Hz. It is easy to calculate that 34 cm is approximately 13 inches, respectively, a 12-inch caliber speaker occupies almost the entire area of the front panel. In addition, it is long-stroke, which allows you to provide a large sound pressure.

An important point: a large working stroke is usually given to small-sized speakers operating in a bass-reflex enclosure. Whereas large radiators (and 12 inches is already a rather large driver) in a closed acoustic design are traditionally made short-throw for better bass control. In this case, the manufacturers clearly had the task of combining high efficiency with small dimensions, so we have an atypical hybrid. In this scenario, the main thing is not to lose the advantages of both approaches.

Minimizing distortion in the SVS SB-1000 Pro transducer is ensured by two high-performance ferrite magnets of the highest class, a magnetic system with a field in the gap, a long voice coil and a rubber surround with a large amplitude of movement. To reduce compression in the magnetic system, a through hole was made to remove air from under the central part of the diffuser.

The built-in Sledge STA-325D amplifier operates in class D and delivers 325 watts in operation and over 800 watts at peak. It has a built-in digital processor that matches the speaker to the cabinet and helps achieve a linear output response. The volume, frequency and phase controls look and function in a digital dimension. The SB-1000 Pro has a full set of inputs: stereo low-level, as well as LFE, combined with low-level. There is also a stereo low-level output with a fixed cutoff frequency of 80 Hz. The latter will allow you to "unload" the power amplifier without a processor in the system.

The SVS SB-1000 Pro subwoofer has a switchable auto-standby system and a trigger input for integration into an automation system. The standby power consumption is 0.5 W, so it is not necessary to turn off the power completely every time. The heavy and durable subwoofer cabinet looks neat and compact. Thanks to the rounded edges of the body and the rounded grill, it does not attract attention and imperceptibly dissolves into the interior. The only thing that betrays its presence in a darkened room is a bright blue LED shining through the fabric of the grill. The grill is firmly attached to the body.

Characteristics:

• acoustic design: closed;
• speaker: 12 inches, long-throw;
• frequency range: 24-260 Hz +/- 3dB;
• amplifier: 325W RMS, 800W peak;
• adjustments: volume, phase 0-180°, frequency filter 50-180 Hz;
• inputs: low-level stereo, LFE;
• outputs: low level stereo (80Hz filter);
• dimensions (WxHxD): 330 x 342 x 375 mm;
• weight: 12.2 kg;
• color: white gloss;
• country (head office): USA.