Record player Lenco LS-50GY

The Lenco LS-50 is a modern turntable with two built-in speakers.

Acoustics:

Built-in.

Automation or mechanics:

Semi-automatic There is a car park.

How are speakers connected?

It is possible to connect to an external stereo system. At the same time, Lenco LS-50 is equipped with standard RCA connectors for line output, which allows you to use any suitable cables for connection.

Connection options:

Wired. 

Built-in phono stage:

Yes. Equipped with a built-in phono stage - can be connected to an external stereo system.

Plate rotation speeds:

33, 45, 78.

Presence of anti-skating:

No.

Hitch-hiking:

Yes.

Tonearm, cartridge:

The lightweight tonearm is mounted on a high-quality bearing, which ensures its smooth movement. Mounted on the tonearm is an MM cartridge, which is fully tuned. The ceramic cartridge 402-M208-015 has a replaceable needle (0.7 mm) - thanks to this, the installation does not require re-adjusting the player.

First setting:

Requires no settings. It remains only to check the accuracy of the set downforce.

Appearance, finish:

The body of the turntable is made of medium density fibreboard, the top panel is finished with natural wood veneer. The disk with a diameter of 300 mm is made of plastic, the set includes a black felt slipmat. The curved tonearm is made of durable plastic and is statically balanced. A spare stylus is supplied with the player. It should be noted that the design of the shell of the complete tonearm allows the replacement of the cartridge.

The turntable has a passive disc drive and supports three rotation speeds - 33.3, 45 and 78 rpm - switched by a three-position toggle switch located at the base of the tonearm. Next to it is a switch - responsible for the operation of hitchhiking and starting the disc player.

ON position - it is enough to move the tonearm towards the spindle and the disk will start rotating.

OFF position - the disc starts spinning immediately after power is supplied, which the player receives from an external 12-volt adapter.

On the back of the case there is an RCA output and a USB-B port for digitizing records. Includes a plastic dust cover.

There are round dome speakers in the left and right legs of the turntable. Each of them is provided with a 2-watt amplifier, the volume level is adjusted thanks to the knob in the lower right part of the top panel of the player.

Weight:

3.4 kg

Digitizing function:

Yes. It is possible to transfer the actual recording to digital files via the USB port.

What's Included:

Turntable, 45 TPM adapter, AC adapter, cleaning cloth, dust cover, extra needle, slipmat, software CD.

Peculiarities:

• Built-in acoustics
• Semi-automatic (hitchhiking after the end of the record)
• Electronic speed change
• Built-in phono stage and USB output for PC

Specifications:

• MATERIAL: Plastic, wood
• AC ADAPTER INPUT VOLTAGE 1 (V): 220-240 V
• AC ADAPTER INPUT FREQUENCY 1: 50-60Hz
• AC ADAPTER 1 OUTPUT (V): 12.00 volts
• AC ADAPTER OUTPUT 1: 1.00 amps
• AC ADAPTER 1 OUTPUT (W): 12.00 W
• AC ADAPTER NO-LOAD POWER CONSUMPTION 1 (W): 0.04 W
• OFF-MODE WATTS 1: 0.100 W
• NUMBER OF AUDIO CHANNELS: Stereo 2.0
• NUMBER OF EXTERNAL SPEAKERS: 2
• TOTAL POWER OUTPUT (W): 4.00W
• AUDIO/VIDEO/DATA OUT: RCA OUT, USB-B PC encoding 1x
• AUDIO/VIDEO/DATA SOURCES: LP
• BATTERY STATUS LED: No
• INTERNET RADIO: No
• ANTIS-SKATE: No
• TURNING TYPE: normal
• BLUETOOTH® PLAYER: No
• MP3 ENCODING: Yes, via PC
• MECHANICAL LIFT: Yes
• NEEDLE PRESSURE ADJUSTABLE: Yes
• HEIGHT CONTROL: No
• SPEAKER DRIVE TYPE: Belt drive
• AUTO-STOP: Yes
• AUTO RETURN: No
• PRODUCT WEIGHT (KG): 3.40 kilograms
• EXTERNAL SPEAKER RESISTANCE (ohm): 0.00 ohm
• TURN SPEED: 33, 45, 78
• SUPPORTED RECORD TYPES: 7, 10, 12
• TRIMMER TYPE: Ceramic
• PLATE MATERIAL: plastic
• PRE-AMP: Yes
• PLAYER WITH SPEAKER(S): Yes, built-in
• DIMENSIONS: (L X W X H) 410x330x118 mm
• WEIGHT: 3.4 kg